Knowing the various methods of measurement, understanding the integration of the AE block and knowing how to correct any inaccuracies with the compensation is all you need to get a correct exposure by shooting in semiautomatic.
The same result can be achieved in a thousand ways, it would be of little use to list them, rather reasoned, and choose for yourself what you think it is more convenient to implement. Do not be tempted by the idea of going forward and always using the evaluation measurement because the others can be very useful.
It is often used in high-contrast scenes by excluding the area that interests us least from the frame, blocking the exposure and recomposing for the shot. You will have realized that establishing the most suitable measurement in the various circumstances is not easy, but we can make some considerations that at the right time can put us on the right path. For a landscape we will never use the spot or partial measurement mode as we are interested in an evaluation that takes into account the whole scene.
The most suitable could be the weighted average in the center because the evaluative would put us in a position to be careful, in terms of brightness, what you focus on (if for example we focus on a very dark tree we risk a slightly overexposed picture). The spot and partial modes (to be almost always combined with the AE block) are more suitable in the moments in which we are interested in the exact exposure of a given area. The evaluation method is finally to be preferred in all other cases, including the doubtful ones.
Another solution that you can take is to buy a microfiber cloth to remove dust residues deposited on the lenses. Perhaps one of the least necessary tools to clean the lens of a lens, usually the liquid is used when there are grease stains on the lens that do not want to know to go away. The liquid should not be poured directly on the lens, rather, put a maximum of two drops on a cloth or brush, and then you move with circular movements, starting from the center. This is vital for a Product Photographer in Boulder.
When you get ready to clean the lens of a lens, first avoid blowing or breathing on it, rather, take the pump and with a couple of strong splashes see if you can eliminate the residual dust on the surface. In the event that there is more resistant dirt, then you can intervene using the microfiber cloth or brush.
Positioned on the central part of the lens and begin to make small circular movements that gradually widen until you get outside. Always take note the techniques for a great product photographer in Boulder.